XLP USE | RHH/RHW

Application: 

Building wire and service cable of Type USE-RHH-RHW-2 is approved for general-purpose wiring, with a maximum conductor temperature of 90°C. This applies to both wet and dry locations, making it suitable for installation in air, conduits, or other officially recognized raceways. Additionally, it is approved for direct burial in circuits not exceeding 600 volts.

product features: 

The conductor is made of compact stranded aluminum alloy from the 8000 Series. The insulation is composed of black cross-linked polyethylene (XLPE), providing resistance to abrasion, moisture, heat, and sunlight.

Standards:

UL Standard 44 (RHW or RHH), UL Standard 854 (USE), and Federal Specification JC-30B in compliance with NEC.
ELITE WIRE USE-RHH-RHW-2
Conductor
(AWG/MGM)
Stranding
Insulation Thickness
(mils)
Outside Diameter
(in)
Weight Per 1000 ft.
(lbs)
Ampacity
(AMPS) *90° C
6
7/w
60
.290
49
60
4
7/w
60
.334
65
75
2
7/w
60
.390
94
100
1
19/w
80
.460
125
115
1/0
19/w
80
.500
150
135
2/0
19/w
80
.540
181
150
3/0
19/w
80
.590
220
175
4/0
19/w
80
.635
268
205
250
37/w
95
.710
320
230
350
37/w
95
.810
428
280
500
37/w
95
.930
591
350
600
61/w
110
1.035
715
385
750
61/w
110
1.130
873
435
1000
61/w
110
1.280
1132
500
The tables are large, so you will need to use your fingers to swipe left to view all columns of data.
The information provided is an approximation and may be subject to standard manufacturing tolerances. Standard lengths are susceptible to a manufacturing tolerance of +/- 10%. It is possible to parallel two, three, or four conductors on a single reel. RHH is suitable for dry locations with a temperature rating of 90°C, while RHW-2 is suitable for wet or dry locations.